Index     FAQ      Search

It is currently Mon Jun 18, 2018 4:25 pm


Forum rules


Can't post in this section? Please read our rules



Reply to topic  [ 21 posts ] 
 Garage clear out 220 turbo bits - job lot 
Author Message
 Post subject: Garage clear out 220 turbo bits - job lot
PostPosted: Wed Feb 28, 2018 12:32 pm 
Forum Senior


Joined:
Wed Dec 29, 2004 7:08 pm
Posts:
258
Hi All,


After 14 years of being on the Rover scene I'm selling up what I have left,

Coupe front bumper with fogs, no cracks but does need a paint job,
Various down pipes, intermediates and back boses
Fuse boards,
Expansion tanks,
Rear trailing arms,
Front lower arms,
Flywheels (4gap)
Radiator and intercooler brackets,
Intake manifold including spare top half's that read 'Turbo',
Hub assemblies,
x4 cylinder heads (cams removed but are there with some surface rust)
4 or 5 bottom ends (some bare block couple built with sumps)
Oil pumps (one brand new)
1 used good crank,
Front shock struts,
various boxes of bolts and mounting plates,
Front coupe wing,
Parts of wiring harness,
Shirt driveshafts
Rover pin's if you wanted to repair or make a loom,
Fan bracket including two fans
Various coolant and boost hoses
Injectors
Spare valves and collets
Oil cooler lines
Clutch cables
Throttle cables,
Stock A.E rods and pistons
Bag full of various sensors
Thermostat housing
Crank and cam pulleys
Gearbox back plates
And I'm sure there's more that I've forgotten. You'll need a van to collect from Birmingham B31.

£200 no offers

If interested 07823 44 35 21


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Thu Mar 01, 2018 1:41 pm 
RT GOD

User avatar

Joined:
Tue Jul 21, 2009 5:09 pm
Posts:
8862
Location:
Newcastle
Bargin wish I had more space lol

_________________
ImageImage

Thread
viewtopic.php?f=10&t=121423


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sat Mar 03, 2018 4:17 pm 
Forum Senior


Joined:
Wed Dec 29, 2004 7:08 pm
Posts:
258
Provisionally sold pending collection next week.


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sat Mar 03, 2018 8:40 pm 
Bronze Trader

Bronze Trader

Joined:
Thu Dec 22, 2005 11:21 pm
Posts:
971
As mentioned, this is a bargain, so I have sapped it up :D Only really for the engine related stuff so if there's anything someone wants from the list please let me know. Certainly any R8 based items I will be selling on as I have no use for them. Ruthlessly making a few quid isnt the intention here, any money I take will be put towards a good cause :)
I'll be collecting the booty next weekend and no doubt it'll take a while to sort out what's what and suss out what to keep and what to sell. I know a few years ago people would have been asking for bits x, y & z off the list so hopefully there's enough interest still in these modern times :lol:
So please dib stuff with a reasonable offer as the money raised should help us all - a bit cryptic I know but check the POL 2018 thread in the living room...


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sat Mar 03, 2018 10:24 pm 
RT GOD


Joined:
Mon Jan 04, 2010 9:11 pm
Posts:
7311
Location:
Lincolnshire
That’s brilliant Mitus

Get that list up

:)

I may need some bits

:lol:

_________________
Image
65k Forged Rover 220 GSi Turbo, 2005 MG ZR trophy SE, 2008 Zafira CDTi SRi 150,
2005 MG ZS 180 mk2


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Mar 04, 2018 1:42 am 
RT GOD

User avatar

Joined:
Tue Jul 21, 2009 5:09 pm
Posts:
8862
Location:
Newcastle
Awesome I would of wanted the engine related items also but I have 3 engines any way lol so would of just been being greedy hahahaha

_________________
ImageImage

Thread
viewtopic.php?f=10&t=121423


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Mar 04, 2018 10:52 am 
RT GOD


Joined:
Mon Jan 04, 2010 9:11 pm
Posts:
7311
Location:
Lincolnshire
Turbo top half. Dibs

Lol

_________________
Image
65k Forged Rover 220 GSi Turbo, 2005 MG ZR trophy SE, 2008 Zafira CDTi SRi 150,
2005 MG ZS 180 mk2


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Mar 04, 2018 8:11 pm 
Forum Senior

User avatar

Joined:
Mon Feb 22, 2010 9:51 pm
Posts:
496
Location:
WIRRAL
Mitus I am after a K-Series Stainless Exhaust for my Cabby so if there is anything like
that in your new stash let us know pal.
;)


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Wed Mar 07, 2018 2:21 pm 
Rovertech Veteran


Joined:
Wed Apr 02, 2003 10:50 pm
Posts:
697
Location:
Leicestershire
Hi Mitus, if you have any coolant hoses for 220 turbo, especially ones that connect to the heater matrix, i'd be interested. thanks.

_________________
RichardK
Image
Rover 220 Turbo Coupe
http://www.rovertech.net/forum/viewtopic.php?t=10208


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Mon Mar 12, 2018 10:44 pm 
Bronze Trader

Bronze Trader

Joined:
Thu Dec 22, 2005 11:21 pm
Posts:
971
I now have the job lot in my possession! Well, actually it's still in the back of my dad's van :lol:
ROVER-25X wrote:
Mitus I am after a K-Series Stainless Exhaust for my Cabby so if there is anything like
that in your new stash let us know pal.
;)

No k-series goodies I'm afraid.

RikK wrote:
Hi Mitus, if you have any coolant hoses for 220 turbo, especially ones that connect to the heater matrix, i'd be interested. thanks.

No coolant pipes either.
Only pipes I remember seeing were boost pipes and IIRC they are uncut if they're of use to anyone. Also remember seeing at least one 2 gap flywheel.

1 Turbo top half put aside for vinny. There's 1 more and 1 injection embossed version too. I'll update the list properly once I've had chance to sort through it all.


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Tue Mar 13, 2018 10:48 pm 
Forum Senior

User avatar

Joined:
Mon Feb 22, 2010 9:51 pm
Posts:
496
Location:
WIRRAL
No worries pal, thanks for checking though. :D


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Fri Mar 30, 2018 1:50 am 
Bronze Trader

Bronze Trader

Joined:
Thu Dec 22, 2005 11:21 pm
Posts:
971
Apologies for the delay getting pics up, there was a lot to sort through! These are the parts which I will definitely not need so are the first to go. Once I've cleared some space I can go through the rest a bit better.

T-Series turbo exhaust manifolds x2. One has a bolt hole opened up (top of pic) presumably for a bigger bolt/stripped thread.
Image

220 Steering racks. One normal power assited, the other a manual so possibly good for track toy?
Image

220 PAS cooling pipe
Image

I assume these are bumper brackets? Having never owned an R8 I don't recognise them
Image

Oil cooler & pipes, a pair of pipes and 1 long pipe only with a braided flexi section
Image

220 Front subframe
Image

Pair of coupe front wings. Dusty but look good condition, think they are Charcoal
Image
Image

Exhaust link pipe, looks to be stainless with mild steel flanges. Cat is gutted so basically a de-cat
Image
Image
Image

R8 Engine bay fusebox
Image

R8 Front bumper with fogs. Paint is cracked in places but bumper itself looks OK.
Image
Image
Image

R8 Tail lights
Image

NASP top half of inlet (no tapping for PCV breather)
Image

R8 O/S headlight
Image

220 Engine mount parts, quantities as shown
Image
Image
Image
Image
Image

Boost pipes. I thought they were un-cut at first but one of the long ones looks longer than the other?
Image

R8 Lower arms fitted with poly bushes
Image

R8 Front hubs
Image

Targa roof panel bag, dusty but good condition
Image

220 fan frame & another with fans
Image

I believe these are referred to as "hockey sticks"? Thought it was a pair but looks like they're both O/S
Image

Chrome grill, all mounting studs are intact
Image

200/25/ZR Header tanks
Image

Standard turbo elbow. Lambda included but don't know if it works!
Image

Dash strips with clock. One is black plastic, the other is wood which has been painted black that is lifting in places.
Image

R8 N/S Front indicator
Image

R8 O/S Hub & lower arm
Image

R8 Front struts & hubs
Image

Some of this may be worthless but I'd rather offer it up in case it is of use to someone. I have no clue what the stuff is worth so please make me offers. Would prefer the bigger stuff to be collected either from me in Oxfordshire OX11 or it can be relocated to Leicestershire LE10 at my dads if that helps.


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Fri Mar 30, 2018 7:23 am 
Forum Senior


Joined:
Wed Aug 09, 2006 6:18 pm
Posts:
287
Location:
Near Mansfield, Notts
Have you got a N/S front hub with ABS?


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Fri Mar 30, 2018 8:58 am 
RT GOD


Joined:
Mon Jan 04, 2010 9:11 pm
Posts:
7311
Location:
Lincolnshire
I want a turbo top inlet
That braided p/steering pipe too (I bought one here last year from ttrw but never received it (or a refund)

The fog lights I would sell separate worth decent money

_________________
Image
65k Forged Rover 220 GSi Turbo, 2005 MG ZR trophy SE, 2008 Zafira CDTi SRi 150,
2005 MG ZS 180 mk2


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Fri Mar 30, 2018 3:02 pm 
Bronze Trader

Bronze Trader

Joined:
Thu Dec 22, 2005 11:21 pm
Posts:
971
Badboyrich wrote:
Have you got a N/S front hub with ABS?


All the hubs have the mounts for an ABS sensor, the pair with the struts still fitted have the sensors in.

vinny19791 wrote:
I want a turbo top inlet
That braided p/steering pipe too (I bought one here last year from ttrw but never received it (or a refund)

The fog lights I would sell separate worth decent money


I put aside a turbo inlet for you. The braided pipe is for the OE oil cooler, not PAS. Point taken with the fogs, if someone wants them I'll take them out of the bumper.

There are also 5 flywheels, 4x 2 gap & 1x 4 gap IIRC.


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Fri Mar 30, 2018 4:31 pm 
RT GOD


Joined:
Mon Jan 04, 2010 9:11 pm
Posts:
7311
Location:
Lincolnshire
:lol:

Bugger

ok mate :thumbup:

_________________
Image
65k Forged Rover 220 GSi Turbo, 2005 MG ZR trophy SE, 2008 Zafira CDTi SRi 150,
2005 MG ZS 180 mk2


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sat Mar 31, 2018 5:34 pm 
Rovertech Kiloposter


Joined:
Sat Mar 05, 2011 1:01 am
Posts:
1088
Location:
leeds
Have you got a pair of abs sensors?


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Apr 01, 2018 9:41 am 
RT GOD


Joined:
Mon Jan 04, 2010 9:11 pm
Posts:
7311
Location:
Lincolnshire
turbo200 wrote:
Have you got a pair of abs sensors?


Lol

I imagine no as they snap just by looking at them :lol:

_________________
Image
65k Forged Rover 220 GSi Turbo, 2005 MG ZR trophy SE, 2008 Zafira CDTi SRi 150,
2005 MG ZS 180 mk2


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Apr 01, 2018 9:55 am 
Rovertech Kiloposter


Joined:
Sat Mar 05, 2011 1:01 am
Posts:
1088
Location:
leeds
:lol: plenty of lube required if I remember correctly!


Last edited by turbo200 on Mon Apr 02, 2018 8:17 pm, edited 1 time in total.

Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Sun Apr 01, 2018 12:17 pm 
Forum Senior


Joined:
Wed Aug 09, 2006 6:18 pm
Posts:
287
Location:
Near Mansfield, Notts
I already have a good O/S hub, but was going to fit ZR diesel shocks / springs to it. I imagine that your full front legs are genuine 220 coupe so would prefer those, and a 2 gap flywheel. I would prefer to pick them up from Hinckley area. Do you want to PM me a price if they are still available.


Offline
  Profile Feedback  
 
 Post subject: Re: Garage clear out 220 turbo bits - job lot
PostPosted: Mon Apr 02, 2018 4:09 pm 
Bronze Trader

Bronze Trader

Joined:
Thu Dec 22, 2005 11:21 pm
Posts:
971
turbo200 wrote:
Have you got a pair of abs sensors?


I'll have a look when I get chance, there were a few boxes of bits & bobs!

Front struts/hubs sold pending payment.


Offline
  Profile Feedback  
 
Display posts from previous:  Sort by  
Reply to topic  [ 21 posts ] 


 Who is online 

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

 
Index  |  FAQ  |  Search

Content © Rovertech - Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group