Index     FAQ      Search

It is currently Mon Oct 23, 2017 10:51 am




Reply to topic  [ 1 post ] 
 Rover 1.6 16v K series Technical data 
Author Message
 Post subject: Rover 1.6 16v K series Technical data
PostPosted: Sat Apr 08, 2006 10:52 am 
Bronze Trader

User avatar
Bronze Trader

Joined:
Sat Aug 09, 2003 7:02 pm
Posts:
11262
Location:
Norwich
VEHICLE IDENTIFICATION

Engine code K16-1.6

Number of cylinders: 4/DOHC
Capacity cm3: 1589
Output:kw (din hp) RPM:::: 82 (111) 6000

Ignition system Description: MAP-i
Trigger location: crankshaft

Fuel system:
Make: Rover
Type: MEMS
Description: MFI-i

Air metering Type: MAP


TUNEING AND EMISSIONS
Ignition coil:
Primary resitance ohms: 0,71-0,81

Fireing order: 1-3-4-2

Ignition timeing BTDC: Engine/rpm 10+5/875 Not adjustable

Idle speed rpm: 875+50

Oil temp for CO test degrees C : 80

CO content at idle tail pipe Vol.% : 0,5 Max

CO2/O2 content at idle speed Vol.%: 14,5-16/0,1-0,5

HC content at idle speed ppm: 100

Oil presure Bar/rpm: 7,0/6500

LUBRICANTS AND CAPACITIES

Engine oil Grade: SAE 10W/40
Alternative: SAE 10W/30

Engine capacity with filter: 4.5 litres

Gearbox oil grade: SAE 75W/80W
Gearbox fluid capacity : 1.8 litres

Brake fluid Type:super DOT 4
Brake fluid capacity: 1 litre

Power steering fluid Type: Dexron ll
Power steering fluid capacity: 0.3 litres

FUEL SYSTEM
Fuel pump delivery presuer BAR: 4.1
System presure without vacume BAR: 2,8-3,2


TIGHTNING TORQUES
Cylinder head

Stage1: 20NM
Stage2: 180 degrees
Stage3: 180 degrees

Tightning sequence

CAM PULLY END (9) (5) (1) (3) (7)
CAM PULLY END (10 (6) (2) (4) (8 )




Main bearings:
Stage 1: 5 NM
Stage 2: 30 NM

Big end bearings:
Stage 1: 20 NM
Stage 2: 45 degrees

Poil pump to block: 9 NM

Sump bolts: 10 NM

Sump drain bolt: 42 NM

Flywheel/Driveplate: use new bolts tighten to 85NM

Clutch to flywheel: 18 NM

Crankshaft pully / damper: 205 NM

Camshaft sprocket / gear: 35 NM

Camshaft carrier / cap :9 NM

Camshaft / rocker cover 10 NM

Inlet manifold to cylinder head: 25 NM

Exhaust manifold to cylinder head: 45 NM

Spark plugs: 27 NM

Oxygen sensor (lambda) : 55 NM



Front hub: Use new nut and tighten to 181 NM

Rear hub: Use new nuts and bolts tighten to 181 NM

Steering rack to rod end: 39 NM

Brake caliper to carrier FRONT: 27 NM

Brake caliper carrier to hub FRONT : 108 NM

Brake caliper to carrier REAR : 27 NM

Brake caliper carrier to hub REAR: 108 NM

Road wheels: 110 NM

Hope this helps :mrgreen:


Offline
  Profile Feedback  
 
Display posts from previous:  Sort by  
Reply to topic  [ 1 post ] 


 Who is online 

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

 
Index  |  FAQ  |  Search

Content © Rovertech - Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group