Index     FAQ      Search

It is currently Mon Oct 23, 2017 10:40 am




Reply to topic  [ 62 posts ]  Go to page Previous  1, 2
 HEL Manufacturing Outlet @ GBE 
Author Message
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Tue Oct 15, 2013 11:00 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
I can see what is done there, but that isn't the correct sealing method Dan.
We can supply it - that's not a problem - but you would not get the warranty with the hoses as it isn't the right way to seal on a Brembo.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Tue Oct 15, 2013 11:07 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
Just to add...
Brembo calipers are designed to seal on the outside, not with a taper seal on the inside.
Peugeot calipers are not different to any other Brembo calipers in terms of the sealing. M10x1 thread.
Effectively what Peugeot did is to bottom out the male fitting in the caliper to allow a seal with a swivel part that has a sort of seat on the end of it.
The fitting you have pictured with the stainless hose is one we keep here. So we can build to that spec,.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 4:17 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
I have the original pug pipe if you want to see the end or I can send the pipe to yourself if needed.
As said by some others it was the banjos that were having leak problems because of the sealing so I wanted to go to the original pug fitting to negate the need for caliper-bolt-banjo/pipe interface and go straight for the caliper-pipe interface.


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 5:51 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
I'll say it again - we'll do anything you want.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 6:40 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
If it def isn't the way to do it then I won't argue with ya, it is your job after all!
Just didn't want it leaking all over the place.
If it could be done as the banjo in purple that'd be great then :)
I'll listen to the experts and take some of the dowry seals too.


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 6:53 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
Purple hose?

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 7:12 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
That's the one :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 7:21 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
No problem.
Paypal to sales@gb-ent.com :)

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 7:46 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.

Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 8:50 pm 
RT BiKiloPoster


Joined:
Sun Oct 01, 2006 5:36 pm
Posts:
2543
Location:
Dalkeith, Nr Edinburgh
Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.

_________________

Image
94 D16 Coupe Turbo- Rotten
'96 D16 Coupe - Sold! '91 216 GTi Twin Cam - Sold!
'93 D16 Coupe - current


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:01 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
Geo_coupe wrote:
Can you do bike hoses as well as car ones grant? Ill be looking at getting a braided front set for my 96 bandit in the next few weeks.


No problem at all.
:)

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:01 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
Skillen wrote:
Payment sent and I PM'd my address but its still in my outbox.
Let me know if it doesn't arrive.
Thanks.

Edit: - I forgot to ask, how do the rear calliper fixings come? As standard fixing just braided hose?


Thanks - got it.
Rear hoses are as per OE, but braided SS.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:07 pm 
Rovertech Veteran


Joined:
Thu Dec 04, 2008 6:20 pm
Posts:
822
Location:
wrexham
rear drum model zr hoses grant?

_________________
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:15 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:20 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
Well, push a spike up my bum...
I've just been doing some digging and it turns out that Brembo made a SINGLE part number with an internal seat to allow a male fitting to be used OR a Banjo.
Only ever used by one OEM manufacturer, that being Peugeot!
In the case of an "old" caliper I concur that it might actually be beneficial to use the male fitting.
Just getting my hat out and eating it, followed by a desert of humble pie.
Apologies to Dan. Seems we were both right, but the male fitting will work OR the banjo. :oops:

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:22 pm 
RT GOD


Joined:
Sat Feb 22, 2003 9:53 pm
Posts:
9993
Location:
Bridgend
How would sir like his hat cooked :lol:

_________________
T16turboZS created by AMW Motorsport
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:24 pm 
Rovertech Veteran


Joined:
Thu Dec 04, 2008 6:20 pm
Posts:
822
Location:
wrexham
Grant620 wrote:
No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)


how much matey?? pink :P

_________________
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:34 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
peteT16 wrote:
How would sir like his hat cooked :lol:

Rare.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:35 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
samsexpress wrote:
Grant620 wrote:
No problem.
M10 female both ends of the rear hose and about a 300mm long hose end to end?
In stock in any colour now :)


how much matey?? pink :P


£55 delivered :)
Please let me know ASAP as Pink is the ONLY colour I don't have! Will be able to have them ready for Friday though :)

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:41 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
Well that is good to know I suppose! Mine are being fully cleaned up so no corrosion around the joint.
But I would prefer if I didn't have to clean up the surface and potentially ruin my lacquer again (Peter will vouch for my clumsiness!) so would it be possible to have that fitting?
It really does reduce the chance of me messing it all up as well!
Sorry for the hassle this is causing :/


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:44 pm 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
No problem at all.
I've amended the lines already :)

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:44 pm 
Silver Trader

User avatar
Silver Trader

Joined:
Mon Jun 14, 2004 11:21 am
Posts:
22322
Location:
Near Junction 9 M6
Grant620 wrote:
Apologies to Dan.


Sh1t the bed, can you say that in my good ear ? :lol:

_________________
Image
The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:46 pm 
Rovertech Veteran


Joined:
Thu Dec 04, 2008 6:20 pm
Posts:
822
Location:
wrexham
Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol

_________________
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:47 pm 
Silver Trader

User avatar
Silver Trader

Joined:
Mon Jun 14, 2004 11:21 am
Posts:
22322
Location:
Near Junction 9 M6
samsexpress wrote:
Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol


Pink suits drums though, limp and gay :oops:

_________________
Image
The Storm Has Gone Again
Bubble/Mk3 conversion looms available including wasted spark AND ZS, pm for prices !


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Wed Oct 16, 2013 11:47 pm 
Forum Senior


Joined:
Sun Mar 25, 2012 11:43 pm
Posts:
242
Grant620 wrote:
No problem at all.
I've amended the lines already :)

Thank you very much :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Thu Oct 17, 2013 7:38 am 
Rovertech Veteran


Joined:
Thu Dec 04, 2008 6:20 pm
Posts:
822
Location:
wrexham
Cableguy wrote:
samsexpress wrote:
Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol


Pink suits drums though, limp and gay :oops:


Your gay :oops:

_________________
Project turbo Express....forged T series Killer...engine no4 come at me

Audi s4 v6 bi turbo...340bhp :)


Offline
  Profile Feedback  
 
 Post subject: Re: HEL Manufacturing Outlet @ GBE
PostPosted: Thu Oct 17, 2013 11:10 am 
Rovertech Moderator

User avatar
Rovertech Moderator
Gold Trader

Joined:
Thu Feb 20, 2003 12:23 am
Posts:
20438
Location:
Somersetshire
samsexpress wrote:
Is that for just the rears?? I was only messing with pink as I knew you wouldn't have them lol


Rears only are £35 delivered.

_________________
Grant620
T16 Big Valve kits - Exclusive to us!
GBE / Cookie Downpipe Group Buy
Image


Offline
  Profile Feedback  
 
Display posts from previous:  Sort by  
Reply to topic  [ 62 posts ]  Go to page Previous  1, 2


 Who is online 

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

 
Index  |  FAQ  |  Search

Content © Rovertech - Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group