Steel Caged PG1 Gearbox Bearings and Seals
| Author |
Message |
|
rednasp
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals  Posted: Fri Jun 02, 2017 2:57 pm |
|
Joined:
Tue Apr 24, 2012 9:48 pm
Posts:
13
Location:
Lifes highway
|
|
Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?
Or is the NASP kit still available ?
_________________
1993 220 NASP Coupe
|
|
|
|
 |
|
MGJohn
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Fri Jun 02, 2017 4:54 pm |
|
RT GOD
|
 |
Joined:
Mon Oct 06, 2003 10:29 pm
Posts:
4208
Location:
Glorious, Gloucestershire
|
rednasp wrote: Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?
Or is the NASP kit still available ? If that is the Input Shaft Bearing in the centre of the PG1 Gearbox Bell Housing I can supply a new one of those if you get stuck locally. Premium quality steel caged.
_________________
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..
B>>M>>W ....
Arrrrrggghhhhh......... ......Arrrrrggghhhhh.........
|
|
|
|
|
|
|
rednasp
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Fri Jun 02, 2017 6:08 pm |
|
Joined:
Tue Apr 24, 2012 9:48 pm
Posts:
13
Location:
Lifes highway
|
MGJohn wrote: rednasp wrote: Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?
Or is the NASP kit still available ? If that is the Input Shaft Bearing in the centre of the PG1 Gearbox Bell Housing I can supply a new one of those if you get stuck locally. Premium quality steel caged. PM Sent.
_________________
1993 220 NASP Coupe
|
|
|
|
|
|
|
galleyzs21
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Mon Apr 02, 2018 7:31 pm |
|
Joined:
Tue Feb 07, 2017 6:11 pm
Posts:
6
|
|
After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply.
|
|
|
|
|
|
|
MGJohn
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Mon Apr 02, 2018 8:17 pm |
|
RT GOD
|
|
Joined:
Mon Oct 06, 2003 10:29 pm
Posts:
4208
Location:
Glorious, Gloucestershire
|
galleyzs21 wrote: After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply. I have a few steel caged premium grade PG1 Bearings new in their boxes. These include actual MG-Rover ones too. some are quite expensive and far from easy to obtain now. Refresh my memory. Which bearings are they. Positions in PG1 Box etc. I may be able to help. John.... Gotta keep these fine old cars moving ... 
_________________
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..
B>>M>>W ....
Arrrrrggghhhhh...............Arrrrrggghhhhh.........
|
|
|
|
|
|
|
Sneekyparrot
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Tue Apr 03, 2018 7:06 am |
|
Forum Senior
|
 |
Joined:
Tue Sep 27, 2011 1:24 pm
Posts:
363
Location:
Solihull
|
|
|
|
|
|
|
galleyzs21
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Tue Apr 03, 2018 9:18 am |
|
Joined:
Tue Feb 07, 2017 6:11 pm
Posts:
6
|
MGJohn wrote: galleyzs21 wrote: After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply. I have a few steel caged premium grade PG1 Bearings new in their boxes. These include actual MG-Rover ones too. some are quite expensive and far from easy to obtain now. Refresh my memory. Which bearings are they. Positions in PG1 Box etc. I may be able to help. John.... Gotta keep these fine old cars moving ... The lower (bell housing) main shaft RJ2024 The upper input shaft still cage 3/LJ28 Missing and input shaft and gear selector seal if you happen to have them to.
|
|
|
|
|
|
|
MGJohn
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Tue Apr 03, 2018 1:45 pm |
|
RT GOD
|
|
Joined:
Mon Oct 06, 2003 10:29 pm
Posts:
4208
Location:
Glorious, Gloucestershire
|
Just checked my store of new PG1 Bearings and I have a spare "UPRATE". This fits on top of the Input Shaft and locates in the upper PG1 casing ( not bellhousing ) There are two sizes of this bearing fitted into PG1s, the larger "UPRATE" version usually fitted to the Gearbox in the Rover Turbo Petrols to cater for the power increase. This image shows my spare steel caged one. Let me know if this is one of those you need. I thought I had the smaller Input Shaft Bearing which fits into the lower case ( bellhousing ) but, used my last a few weeks ago with another rebuild. This thread has reminded me to get some more of those. This one I can offer :~ 
_________________
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..
B>>M>>W ....
Arrrrrggghhhhh...............Arrrrrggghhhhh.........
|
|
|
|
|
|
|
galleyzs21
|
Post subject: Re: Steel Caged PG1 Gearbox Bearings and Seals Posted: Tue Apr 03, 2018 10:31 pm |
|
Joined:
Tue Feb 07, 2017 6:11 pm
Posts:
6
|
MGJohn wrote: Just checked my store of new PG1 Bearings and I have a spare "UPRATE". This fits on top of the Input Shaft and locates in the upper PG1 casing ( not bellhousing ) There are two sizes of this bearing fitted into PG1s, the larger "UPRATE" version usually fitted to the Gearbox in the Rover Turbo Petrols to cater for the power increase. This image shows my spare steel caged one. Let me know if this is one of those you need. I thought I had the smaller Input Shaft Bearing which fits into the lower case ( bellhousing ) but, used my last a few weeks ago with another rebuild. This thread has reminded me to get some more of those. This one I can offer :~ Pm'd you, looks like what I need.
|
|
|
|
|
|
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
